华为路由器，交换机console，telnet，ssh登录方式配置，eNSP三维

[AR1]

第二步有效性破解：

2、telnet指定（局限性可以远程指定备有；有效性作法备有非常简单。局限性图表通过也就是说传输，安全及性不高）

单纯破解有效性备有

第一步备有破解：

The device is running!

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sys AR2

[AR2]user-in

[AR2]user-interface vty 0 4

[AR2-ui-vty0-4]user pr

[AR2-ui-vty0-4]user privilege le 15 备有普通用户实质上等级为高达等级

[AR2-ui-vty0-4]set au

[AR2-ui-vty0-4]set authentication pa

[AR2-ui-vty0-4]set authentication password ci 备有有效性作法为破解认证

[AR2-ui-vty0-4]set authentication password cipher huawei 备有破解为huawei

[AR2-ui-vty0-4]pr

[AR2-ui-vty0-4]protocol inb

[AR2-ui-vty0-4]protocol inbound telnet 允许telnet协商通过

[AR2-ui-vty0-4]q

[AR2]int g0/0/0

[AR2-GigabitEthernet0/0/0]ip add 192.168.1.1 24 备有模块邮箱和掩码

Sep 12 2023 10:34:22-08:00 AR2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

[AR2-GigabitEthernet0/0/0]q

[AR2]

第二步有效性破解：

The device is running!

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sys AR1

[AR1]int g0/0/0

[AR1-GigabitEthernet0/0/0]ip add 192.168.1.2 24 备有模块邮箱和掩码

Sep 12 2023 10:35:16-08:00 AR1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

[AR1-GigabitEthernet0/0/0]q

[AR1]q

telnet 192.168.1.1 通过telnet远程AR2

Press CTRL_] to quit telnet mode

Trying 192.168.1.1 ...

Connected to 192.168.1.1 ...

Login authentication

Password: 转换成破解huawei

AAA有效性备有：

第一步备有破解：

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sy AR2 改名

[AR2]int g0/0/0 转到模块g0/0/0

[AR2-GigabitEthernet0/0/0]ip add 192.168.1.1 24 备有模块邮箱和掩码

[AR2-GigabitEthernet0/0/0]q

[AR2]aaa 转到aaa备有Mode

[AR2-aaa]loc

[AR2-aaa]local-user ceshi pa 另建本地普通用户ceshi

[AR2-aaa]local-user ceshi password ci 增设破解为密文

[AR2-aaa]local-user ceshi password cipher huawei pr 增设破解为huawei

[AR2-aaa]local-user ceshi password cipher huawei privilege le

[AR2-aaa]local-user ceshi password cipher huawei privilege level 15 增设理论上普通用户命令等级为高达级

Info: Add a new user.

[AR2-aaa]local

[AR2-aaa]local-user ceshi ser

[AR2-aaa]local-user ceshi service-type telnet 增设另建普通用户ceshi将对telnet协商生效

[AR2-aaa]q

[AR2]user-in

[AR2]user-interface vty 0 4 转到虚拟模块0-4共有五个模块

[AR2-ui-vty0-4]au

[AR2-ui-vty0-4]authentication-mode aaa 备有模块有效性Mode为aaa有效性

[AR2-ui-vty0-4]pr

[AR2-ui-vty0-4]protocol in

[AR2-ui-vty0-4]protocol inbound telnet 备有理论上模块可以通过telnet协商

[AR2-ui-vty0-4]q

[AR2]

第二步有效性破解：

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sy AR1

[AR1]int g0/0/0 转到模块g0/0/0

[AR1-GigabitEthernet0/0/0]ip add 192.168.1.2 24 备有模块邮箱和掩码

[AR1-GigabitEthernet0/0/0]q

[AR1]q

telnet 192.168.1.1 在普通用户Mode下测试telnet AR2

Press CTRL_] to quit telnet mode

Trying 192.168.1.1 ...

Connected to 192.168.1.1 ...

Login authentication

Username:ceshi 转换成普通的网站ceshi

Password: 转换成破解huawei（转换成破解时，转换成的破解不显示）

成功远程联接到AR2的电子系统

3、ssh指定（局限性可以远程指定备有；密文传输图表，安全及性高。局限性有效性备有相较复杂）

AAA有效性备有（ssh不支持单纯破解有效性）

第一步备有破解：（在eNSP中好好ssh实验时建议运用于因特网）

sys

Enter system view, return user view with Ctrl+Z.

[huawei]sys LSW2

[LSW2]int vlan 1

Sep 11 2023 11:25:33-08:00 LSW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2

5.191.3.1 configurations he been changed. The current change number is 6, the

change loop count is 0, and the maximum number of records is 4095.

[LSW2-Vlanif1]ip add 192.168.1.1 24 转到模块vlan1备有邮箱和掩码

[LSW2-Vlanif1]

Sep 11 2023 11:25:44-08:00 LSW2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol I

P on the interface Vlanif1 has entered the UP state.

[LSW2-Vlanif1]q

[LSW2]

Sep 11 2023 11:25:53-08:00 LSW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2

5.191.3.1 configurations he been changed. The current change number is 7, the

change loop count is 0, and the maximum number of records is 4095.

[LSW2]info

[LSW2]info

[LSW2]undo info-center enable 停用所属单位，可以不转换成

Info: Information center is disabled.

[LSW2]stelnet server en 敞开ssh一站式

Info: Succeeded in starting the Stelnet server.

[LSW2]ssh user ceshi au 另建ssh普通的网站为ceshi

[LSW2]ssh user ceshi auth

[LSW2]ssh user ceshi authentication-type pa

[LSW2]ssh user ceshi authentication-type password 增设普通用户ceshi的有效性作法为破解

Info: Succeeded in adding a new SSH user.

[LSW2]ssh user ceshi ?

assign Set the key

authentication-type Authentication type

authorization-cmd Authorization mode

service-type Set service type

sftp-directory Set SFTP directory

[LSW2]ssh user ceshi ser

[LSW2]ssh user ceshi service-type ?

all Set all service type

sftp Set SFTP service type

stelnet Set Stelnet service type

[LSW2]ssh user ceshi service-type stel

[LSW2]ssh user ceshi service-type stelnet 备有ceshi将一站式ssh协商首款中ssh=stelnet

[LSW2]aaa

[LSW2-aaa]loca

[LSW2-aaa]local-user ceshi pa 另建本地普通用户ceshi，这里另建的普通的网站要与以后ssh中创建的普通的网站一致

[LSW2-aaa]local-user ceshi password ci

[LSW2-aaa]local-user ceshi password cipher huawei pr

[LSW2-aaa]local-user ceshi password cipher huawei privilege le

[LSW2-aaa]local-user ceshi password cipher huawei privilege level 15

Info: Add a new user.

[LSW2-aaa]local-user ceshi ser

[LSW2-aaa]local-user ceshi service-type ssh 备有另建普通用户ceshi将曾是那个协商

[LSW2-aaa]q

[LSW2]user-in

[LSW2]user-interface vty 0 4

[LSW2-ui-vty0-4]au

[LSW2-ui-vty0-4]aut

[LSW2-ui-vty0-4]authentication-mode aaa 备有有效性作法为aaa有效性

[LSW2-ui-vty0-4]pr

[LSW2-ui-vty0-4]protocol inb

[LSW2-ui-vty0-4]protocol inbound ssh 允许通过协商ssh的图表

[LSW2-ui-vty0-4]q

[LSW2]

第二步有效性破解：

The device is running!

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sys

[Huawei]sysname LSW1

[LSW1]

Sep 11 2023 11:30:03-08:00 LSW1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2

5.191.3.1 configurations he been changed. The current change number is 4, the

change loop count is 0, and the maximum number of records is 4095.

[LSW1]undo info-center en 停用所属单位，可以可不转换成

Info: Information center is disabled.

[LSW1]int vlan1

[LSW1-Vlanif1]ip add 192.168.1.2 24 转到vlan1模块下备有邮箱和掩码

[LSW1-Vlanif1]ping 192.168.1.1 测试图表连通性

PING 192.168.1.1: 56 data bytes, press CTRL_C to break

Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=255 time=80 ms

Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=255 time=50 ms

Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=255 time=40 ms

Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=255 time=60 ms

Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=255 time=30 ms

；还有 192.168.1.1 ping statistics ；还有

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/g/max = 30/52/80 ms

[LSW1-Vlanif1]q

[LSW1]stel

[LSW1]stelnet ser en 敞开ssh协商

Info: Succeeded in starting the Stelnet server.

[LSW1]ssh c

[LSW1]ssh client fi

[LSW1]ssh client first-time en 第一次运用于ssh，加载ssh客户端

[LSW1]stelnet 192.168.1.1 运用于ssh联接LSW2，首款中ssh=stelnet

Please input the username:ceshi 转换成普通的网站ceshi

Trying 192.168.1.1 ...

Press CTRL+K to abort

Connected to 192.168.1.1 ...

The server is not authenticated. Continue to access it? [Y/N] :y 达成协议来进行链接

Se the server's public key? [Y/N] :y 达成协议保存公共有钥匙

The server's public key will be sed with the name 192.168.1.1. Please wait...

Enter password: 转换成破解huawei

Info: The max number of VTY users is 5, and the number

of current VTY users on line is 1.

The current login time is 2023-09-11 11:32:58.